Elastyczne gumowe staw z pojedynczą piłką

Pojedyncza kulka Fyl Elastyczna gumowa staw przyjmuje zaawansowaną technologię produkcji zagranicznej. Podczas procesu produkcyjnego warstwa wewnętrzna jest poddawana wysokim ciśnieniu w celu promowania wiązania między przewodem nylonowym a warstwą gumową. Dlatego, w porównaniu ze zwykłymi elastycznymi gumowymi złączami, jedna kulka elastyczne gumowe stawy mogą wytrzymać wyższe ciśnienie robocze i mieć większą użyteczność.

Wyślij zapytanie

Opis produktu

The single ball flexible rubber joint is one of FYL's many products. The most intuitive features of this joint are high elasticity, high vacuum resistance, medium resistance, and weather resistance. It has strong internal pressure resistance, good elastic deformation effect, and can withstand higher pressure.

The single ball flexible rubber joint is produced using a new process of blowing molds. The rubber composite ball has a multi-layer design, including an inner layer, a reinforcement layer, a middle layer, and an outer layer, which is combined with a loose sleeve forged low-carbon steel flange to form this joint product.

In addition to the high pressure resistance and good elasticity we have mentioned, the single ball flexible rubber joint also has the characteristics of large displacement, good shock and noise reduction, and easy installation. In specific use, it is commonly used in pipeline vibration reduction and displacement compensation. It is widely used in basic projects such as chemical industry, construction, water supply, drainage, petroleum, light and heavy industry, refrigeration, sanitation, plumbing, full protection, and electricity, especially some pipelines with large vibrations and frequent thermal changes.

Technical Specification

Subject	JGD-1	JGD-2	JGD-3
Pressure MPa(kgf/cm2 )	1.0(10）	1.6（16）	2.5（25）
Temperature℃	-15℃～115℃ OR -30℃～250℃
Working Medium	Air, water, sea water, hot water, oil, acid, alkali, etc.

Size DN		L mm	Flange thickness b mm	Z-Ød	axial displacement mm		Lateral displacement mm	Deflection Angle a1+a2
mm	inch	L mm	Flange thickness b mm	Z-Ød	elongation	compression	Lateral displacement mm	Deflection Angle a1+a2
32	1.25	95	16	4-18	6	9	9	15
40	1.5	95	18	4-18	6	10	9	15
50	2	105	18	4-18	7	10	10	15
65	2.5	115	20	4-18	7	13	11	15
80	3	135	20	4-18	8	15	12	15
100	4	150	22	8-18	10	19	13	15
125	5	165	24	8-18	12	19	13	15
150	6	180	24	8-23	12	20	14	15
200	8	210	24	8-23	16	25	22	15
250	10	230	26	12-23	16	25	22	15
300	12	245	28	12-23	16	25	22	15
350	14	255	28	16-23	16	25	22	15
400	16	255	30	16-25	16	25	22	15
450	18	255	30	20-25	16	25	22	15
500	20	255	32	20-25	6	25	22	15
600	24	260	36	20-30	6	25	22	15